Xbox 360 And The Red Ring Of Death – How To Deal With It
Your Xbox 360 is a fantastic machine when it works as it should. This only makes the ring of death malfunction even more painful. Being reliable is not one of the Xbox’s strengths.
The typical way that the Xbox fails is via a general hardware failure otherwise known as the red ring of death. This occurs when the lights around the on/off button change over to three flashing red lights.
So what must you do to get the console working again? Normally, the problem is that your console has overheated and it needs time to cool off.
After it has cooled down, you can’t just start it up again and expect the overheating problem to magically go away. If the console hasn’t been damaged, then you’ll have to find ways to keep your Xbox running cool.
The following are a few suggestions for doing this.
1.) Run the Xbox in a cool environment. Don’t use it in direct sunlight. If you are living in a very warm climate, always have the air conditioner on when using your Xbox.
2.) Limit the number of hours that you use your Xbox. Refrain from gaming sessions that last more than a couple of hours. Be aware that some games make the console work very hard and therefore make it generate heat more rapidly.
3.) Keep the cooling vents clear of anything that obstructs air from flowing into the Xbox. This means grit and dust within the vents or objects that are blocking the entrance to the vents. The console must not be placed in confined areas that don’t allow the free flow of air.
4.) It’s possible that there’s a source of heat near the console that you are unaware of. It may be a stove, heater vent, furnace, or warm electronics in the vicinity.
5.) The cooling requirement of the power adapter is often overlooked. Great care must taken to ensure that air is free to flow into the adapter. Keep it off of shaggy rugs and out of confined spaces. One suggestion is to hang it off of it’s cord on a hook.
If any of the above suggestions solve your ring of death problem then congratulations are in order. If not, then the overheating has caused hardware damage to occur which will require repair. You can either send your console back to Microsoft (if your warranty is still intact) or you can send it to a repair shop.
